Minderman Model A Puller
Shaft Puller 1" - 1.50"
The Algonac Shaft Puller is made of high quality stress proof steel to exacting specifications of maximum protection of the s..
$291.00
Out of Stock till at least
Walter Propeller Puller NO. 2N
Capacity: 2,3,4 & 5 Blades up to 28" in Diameter and up to 2" Shaft
..
$371.20 $464.00
Strut Puller 1.250" OD - 2.00" OD
The Algonac Strut Bearing Puller eliminates the removal of the strut from the boat or the hard pounding or sawing of..
$300.00
Shaft Size: 1.50" | Full & Jam Nut Thread Size: 1-1/8" - 7 | Keystock 3/8" | Cotter Pin: 5/32"
Cancer and Reproductive Harm - P65Warnings..
$58.28 $83.26
Shaft Size: 2.00" | Full & Jam Nut Thread Size: 1-1/2" - 6 | Keystock 1/2" | Cotter Pin: 3/16"
Cancer and Reproductive Harm - P65Warnings..
$116.73 $166.76
Discontinued
Model B Propeller Puller
Props 24 to 80 inches (maximum jaw opening 15 inches)
A Great Time-Saver! Protects the Propeller, the Shaft, and the Bearings..
$795.00
Strut Puller 1.250" OD - 2.00" OD
The Algonac Strut Bearing Puller eliminates the removal of the strut from the boat or the hard pounding or sawing of..
$300.00
Shaft Puller 1" - 1.50"
The Algonac Shaft Puller is made of high quality stress proof steel to exacting specifications of maximum protection of the s..
$291.00
Shaft Puller Nut 7/8" Shaft
Optional nut used to pull 7/8" shafts with a 5/8"-11 thread body ..
$66.00
Discontinued
Shaft Puller Nut 1-3/4" Shaft
Optional nut used to pull 1.75" shafts with a 1-1/4"-7 thread body ..
$65.00
Acme C Clamp Ski Boat Propeller Puller 228S 3 Blade or 4 Blade1.00", 1.125", 1-1/8" and Splined Shafts Max opening 4.50"ACME MARINE GROUP PROP
PULLER ..
$139.00 $165.00
Out Of Stock
Prop Knocker 1.00" - For 1.00" & 1.125" SAE Shafts
Thread Size 3/4-10
High Strength Nibral Cast - CNC Machined..
$69.95
PropSmith 1.75"
Propeller Installation and removal tool for 1.75" shaft
For use with 3 holes 5/16"-18 on 2.25" Bolt Circle
PropSmith # PH175-PL175..
$744.00
VEEM Prop Puller VPP-1.750
Propeller Installation and removal tool for 1.75" SAE shaft
For use with 3 holes 5/16""-18 on 2.25" Bolt Circle
VEEM# VPP-1..
$448.50
Walter Propeller Puller NO. 1
Capacity: 3 Blades Only up to 20" in Diameter and up to 1-1/2" Shaft
..
$188.80 $236.00